Servoday Two & Four Rope Bulk Handling Grabs

Servoday Group Presents

SERVODAY TWO & FOUR ROPE BULK HANDLING GRABS

Servoday Four & Two Rope Mechanical Grabs for loading and unloading sand, coal, mineral power, grain, salt, bauxite, iron ore, lime, clinker, fertilizers etc.

Available volume capacity from 1.0 M3 to 50.0 M3 (Cubic Meter)

The tightly clamping devices of Servoday Electro Hydraulic Log - Timber Grabs feature an increased slewing angle to enable one single grab to capture individual logs from corners of Timber Vessel to individual logs with small diameters securely.

The Servoday Electro Hydraulic Log-Timber Grabs are the ideal tools for the handling of timber. No matter if you clamp more logs or just a single one, thanks to the excellent closing characteristics, the load is held tight securely.
  
The use of HARDOX steel in the manufacture of cutting edges ensures a long service life.

The ideal decision for any Port Crane, Barge Crane or Cargo Ship. Regardless of whether incited by wired or wireless remote control, the opening procedure can be hindered and proceeded with a few times so as to guarantee the material is emptied in a controlled way.

The Servoday Grabs have developed many type of Grab models, the number of shells/tine/teeth, the shape and space between the shells/tine/teeth, can vary in order to optimize the Servoday Electro Hydraulic Log - Timber Grabs  for each specific application.

Please contact Servoday Grabs to choose suitable models for your application.

FEATURES

DESIGN

COMPUTER-AIDED DESIGN FACILITY (AUTOCAD & 3D)

A dedicated team of experts continuously engage to improve design to achieve higher efficiency and reduce the cost of maintenance.

DENSITY

BULK DENSITY -  HANDLING CAPACITY

Servoday Two & Four Rope Bulk Handling Grabs are designed to handle difficult materials, like Sand, Coal, Mineral Powder, Grain, Salt, Bauxite, Iron Ore, Lime, Clinker, Fertilizers etc.

The maximum bulk density of 7.0 Tones Per Cubic Meter can be handled.

RESISTANCE

HARDOX WEAR PLATE, THE HARD AND TOUGH STEEL 

The Servoday Electro Hydraulic Log - Timber Grabs steel work is made of high quality and resistant materials, while the parts in contact with the products are made of wear-resistant steel.

ENGINEERING

WORKING

GRAB OPENING AND CLOSING SYSTEM

The Servoday Two & Four Rope Bulk Handling Grabs - The rope snatch is worked on a crane with two raising drums. These are the end rope drum and the suspension rope drum. The Grab is hanging on Crane Hook. Opening and closing of the Bucket shells is done by the closing ropes and the coordinated pulley assembly. (Closing ropes are diverted numerous occasions through rope pulleys)

As indicated by the amount of closing and suspension ropes, there is a refinement between single-line, twofold rope or four-rope gets.

The rope get gains the power for closing and assembling the material through its dead weight, the lever proportion and the reeving of the pulley square.

KICK PLATES

HOLDING CAPACITY EXECUTION

The Servoday Two & Four Rope Bulk Handling Grabs  are designed and fitted with kick plates to reduce capacity in case of heavier cargoes or cranes with less lifting capacity.

The kick plates are bolted to the bucket body and can be unbolt as per the requirements.

The removing of spill plates is designed to adjust the grab capacity to suit cargoes with varying densities as per your requirements.

HOOK ON

EASE OF USE AND DEPLOYMENT

The Servoday Two & Four Rope Bulk Handling Grabs can immediately get operational by hooking the Grab with suitable type of Ship or Shore Crane to start loading or unloading of any kind of bulk materials, the Grabs can be handle without any operating hurdles.

Electro Hydraulic LOG-TIMBER Grabs  
volume capacity FROM 0.4 to 3.2 Cubic Meter (cbm) 

0.4

CBM

Teeth/Tine - 6 Nos
Motor - 15 Kw

datasheet
0.8 CBM ELECTRO HYDRAULIC ORANGE PEEL GRAB

0.8

CBM

Teeth/Tine - 6 Nos
Motor - 15 Kw

datasheet
1.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRAB

1.0

CBM

Teeth/Tine - 5, 6 or 8 Nos
Motor - 22 Kw

datasheet
1.5 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

1.5

CBM

Teeth/Tine - 5 or 6 Nos
Motor - 22 Kw

datasheet
2.2 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

2.2

CBM

Teeth/Tine - 6 or 8 Nos
Motor - 22 Kw

datasheet
3.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

3.0

CBM

Teeth/Tine - 6 or 8 Nos
Motor - 37Kw

datasheet
4.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

4.0

CBM

Teeth/Tine - 8 or 9 Nos
Motor - 37 or 45 Kw

datasheet
5.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

5.0

CBM

Please contact us for Grabs above 20 Cubic Meters Volume

datasheet
6.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

6.0

CBM

Teeth/Tine - 9 Nos
Motor - 45 Kw

datasheet
8.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

8.0

CBM

Teeth/Tine - 9 Nos
Motor - 45 or 55 Kw

datasheet
10.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

10

CBM

Teeth/Tine - 9 Nos
Motor - 55 or 75 Kw

datasheet
12.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

12+

CBM

Please contact us for Grabs above 12 Cubic Meters Volume

datasheet

LIKE OUR WORK? LET’S START TOGETHER

WE PROVIDE SOLUTIONS FOR EVERYONE

Electro Hydraulic Orange Peel Grab

© 2018 Storearmy. All Rights Reserved. Powered by storearmy.com