Electro Hydraulic Orange Peel Grab for Steel Scrap (Grapple)

Servoday Group Presents

STEEL SCRAP HANDLING ELECTRO. -HYDRAULIC ORANGE PEEL GRABS

SHIP LOADING - UNLOADING - STEEL MELTING FURNACE CHARGING - SCRAP HANDLING
Available capacity from 0.5 M3 to 15 M3 (Cubic Meter)

The most difficult material to handle is Steel Scrap, as it comes in all sizes and shapes and is never the same, we have developed extreme strong Electro Hydraulic Orange Peel Grabs with relative low dead weights to combine extreme strength and durability.

The ideal decision for any Port Crane, Barge Crane or Cargo Ship. Regardless of whether incited by wired or wireless remote control, the opening procedure can be hindered and proceeded with a few times so as to guarantee the material is emptied in a controlled way.

The Servoday Grabs have developed many type of Grab models, the number of shells/tine/teeth, the shape and space between the shells/tine/teeth, can vary in order to optimize the Servoday Electro Hydraulic Orange Peel Grabs for each specific application.

Please contact Servoday Grabs to choose suitable models for your application.

FEATURES

DESIGN

COMPUTER-AIDED DESIGN FACILITY (AUTOCAD & 3D)

A dedicated team of experts continuously engage to improve design to achieve higher efficiency and reduce the cost of maintenance.

DENSITY

DENSITY HANDLING CAPACITY UPTO 8.0 T/CBM

Servoday Electro Hydraulic Orange Peel Grabs are designed to handle difficult materials, like Iron Steel Scrap, Structural Scraps, Mixed Scraps, Scrap Pellets, fragmented shavings, crushed Chips, Biomass, Cut-up Tyres, Industrial waste, urban waste and Municipal Solid Waste.
Iron Steel Scrap – 0.4 to 1.0 Tone/M3
Cut-up Tyres Chips - 0.32 Tone/M3
Municipal Solid Waste - 0.4 to 0.5 Tone/M3
Stone - 1.1 to 1.6 Tone/M3
Pig Iron - 7.8 Tone/M3
Wood Chips - 0.25 to 0.35 Tone/M3

RESISTANCE

HARDOX WEAR PLATE, THE HARD AND TOUGH STEEL 

Grabs made of Hardox steel are light, rigid and wear-resistant, ensure long lasting wear protection.
The Electro Hydraulic Orange Peel Grabs steelwork is made of high quality and resistant materials, while the parts in contact with the products are made of wear-resistant steel. The Pins are made of hardened/tempered Alloy Steel and bushing are in hardened and tempered steel; this solution enable a long service life even in difficult conditions and with poor lubrication.

HYDRAULIC CONTROL

REXROTH MAKE HYDRAULIC MANIFOLDS & VALVES

Electro Hydraulic Orange Peel Grabs comes with Manifolds integrated safety functions against overload pressure, combining ball valve, check valve and pressure relief valve.
Directional Control Valves – This includes start, stop and flow directional control.
Pressure Control Valves – This includes pressure relief and control, as well as sequence and unloading of said pressure.
Check Valves – Cartridge valves can even be used as check valves, and offer pilot-operated check capabilities.
Flow Control Valves – This allows the user to effectively control the flow of hydraulic fluid through the system.

GRAB CONTROL

RADIO REMOTE CONTROLLER


Wireless Radio Remote for controlled opening in mid air with operating distance of 100 Meters for Electro Hydraulic Orange Peel Grabs opening and closing.

Frequency: 310.0325~331.165Mhz
Frequency Generation: Crystal (plug in)
Channel: 80
Channel Spacing: 0.2675MHz
Control distance: Up to 100 Meters
Certificates: CE, FCC, ISO9001:2008
Unique Code: Over 4.3 Billion Unique ID codes

PUMP

HYDRAULIC PUMP & CONTROLLER

Electro Hydraulic Orange Peel Grabs Pump features:
- Robust pump with long service life
- Very high total efficiency
- High power density
- Large variety of available nominal sizes allows exact adjustment to the application
- Optional with long-life bearings for the nominal sizes 250 to 1000
- Bent-axis design

We deal in with all famour brands, like Adan hydraulic pumps, Atos, Bosch Rexroth, Breuninghaus hydraulic pumps, Bucher, Casappa hydraulic pumps, Commercial, Continental hydraulic pumps, Dowty hydraulic pump, Dynapower, Eaton, Eaton Vickers, Hamworthy, Hydromatik, Kawsaki, Linde, Parker hydraulic pumps, Permco, Poclain, Racine, RHL, Sauer Danfoss / Sauer Sundstrand hydraulic pumps, Salami hydraulic pumps, Tyrone, Uchida hydraulic pumps, Vickers and White hydraulic pumps.

ENGINEERING

WORKING

GRAB OPENING AND CLOSING SYSTEM

The Servoday Electro Hydraulic Orange Peel Grabs , comes with reversible version, equipped with a Hydraulic Piston Pump, the opening and closing are obtained by reversing the direction of Motor rotation.
The Servoday Orange Peel Grabs equipped with valves that allow:-
- Control the pressure differentiated in closing and opening operation.
- The Control of the Teeth/Tines during the closure to avoid cavitation.
- Maintaining the pressure of the teeth/Tines even.
- Protecting the circuit from overloads induced by excessive stress.
The use of a Hydraulic Pump with high performance and the presence of an unloading valve on the closing side of the circuit makes the equipment suitable even for heavy work

OPERATING BENEFITS

COMING SOON

xxx

HOOK ON

EASE OF USE AND DEPLOYMENT

The Servoday Electro Hydraulic Orange Peel Grabs can immediately get operational by hooking the Grab with any type of Ship or Shore Crane to start loading or unloading of any kind of materials like Steel Scrap, Pig Iron, Melting Scrap and any many more commodities can be handle without any operating hurdles.

CHOICE OF TINES

TEETH - TINES SUITABLE TO APPLICATIONS

The Servoday Electro Hydraulic Orange Peel Grabs are very popular for Shore and off-shore use to handle bulk materials.
With number of Teeth/Tines ranging from 4 to 9 Nos. depending on the size and loading needs.
To obtain maximum performance with any type of material, many types of Teeth/Tines are available.

ATTACHMENTS

ORANGE PEEL ATTACHMENT GRABS

Servoday Electro Hydraulic Orange Peel Grabs Attachments equipped with heavy duty Hydraulic Cylinders, guaranteeing a longer than average life.
The teeths/tines of our Orange Pellet Attachments made of HARDOX materials, feature a box type structure, which provides the maximum level of strength and durability, the inner surface of the tines are built using a heavy duty thick plates, our Jaw tips are constructed from a special wear resistant steel, which offers better abrasion resistance than typical materials.
The Orange Peel Attachments comes with robust Rotator, the attachments are available from capacity 300 Liters to 1500 Liters volume. (Additional sizes available on request)

COMING SOON!

COMING SOON!

COMING SOON!

Electro Hydraulic Orange Peel Grabs  SIZES FROM 0.5 to 20 Cubic Meter (cbm) capacity

0.5

CBM

Teeth/Tine - 6 Nos
Motor - 15 Kw

datasheet
0.8 CBM ELECTRO HYDRAULIC ORANGE PEEL GRAB

0.8

CBM

Teeth/Tine - 6 Nos
Motor - 15 Kw

datasheet
1.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRAB

1.0

CBM

Teeth/Tine - 5, 6 or 8 Nos
Motor - 22 Kw

datasheet
1.5 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

1.5

CBM

Teeth/Tine - 5 or 6 Nos
Motor - 22 Kw

datasheet
2.2 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

2.2

CBM

Teeth/Tine - 6 or 8 Nos
Motor - 22 Kw

datasheet
3.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

3.0

CBM

Teeth/Tine - 6 or 8 Nos
Motor - 37Kw

datasheet
4.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

4.0

CBM

Teeth/Tine - 8 or 9 Nos
Motor - 37 or 45 Kw

datasheet
5.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

5.0

CBM

Please contact us for Grabs above 20 Cubic Meters Volume

datasheet
6.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

6.0

CBM

Teeth/Tine - 9 Nos
Motor - 45 Kw

datasheet
8.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

8.0

CBM

Teeth/Tine - 9 Nos
Motor - 45 or 55 Kw

datasheet
10.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

10

CBM

Teeth/Tine - 9 Nos
Motor - 55 or 75 Kw

datasheet
12.0 CBM ELECTRO HYDRAULIC ORANGE PEEL GRABS

12+

CBM

Please contact us for Grabs above 12 Cubic Meters Volume

datasheet

LIKE OUR WORK? LET’S START TOGETHER

WE PROVIDE SOLUTIONS FOR EVERYONE

Electro Hydraulic Orange Peel Grab

© 2018 Storearmy. All Rights Reserved. Powered by storearmy.com